What are the characteristics of planetary deceleration? What aspects should be paid attention to during installation?

The inner gear of the planetary reducer is carburized, quenched and ground, which has the characteristics of small size, light weight, high load capacity, long service life, stable operation, low noise, large output torque, high speed ratio, high efficiency and strong performance. The internal gears of the planetary reducer are carburized, quenched and ground, with the characteristics of small size, light weight, high load capacity, long service life, stable operation, low noise, large output torque, high speed ratio, high efficiency and excellent performance. It has the characteristics of power splitting and multi-tooth meshing. It is a novel reducer with wide versatility. It is suitable for industrial sectors such as lifting and transportation, mining, petrochemical, construction machinery, medical equipment, cars and aviation. The planetary reducer has the characteristics of high rigidity, high precision and high transmission efficiency. Most of them are installed on stepper motors and servo motors to reduce the speed, increase the torque, and match the inertia. The internal gears of the planetary reducer are carburized, quenched and ground, with the characteristics of small size, light weight, high bearing capacity, long service life, stable operation, low noise, large output torque, large speed ratio, high efficiency and excellent performance. It has the characteristics of power splitting and multi-tooth meshing. It is a new type of reducer with wide versatility. The maximum input power can reach 104kW. Suitable for hoisting and transportation, engineering machinery, metallurgy, mining, petrochemical, construction machinery, light industry textiles, medical equipment, instrumentation, cars, ships, weapons and aerospace and other industrial sectors, new planetary series WGN fixed shaft transmission reducer , WN primary and secondary gear transmission reducer, elastic uniform load less tooth difference reducer. the Three precautions when installing and using planetary reducers: 1. Hammering is strictly prohibited The output shaft of the reducer adopts the method of direct hammering. Since the layout of the output shaft of the reducer cannot accept axial hammering, the screw hole at the shaft end can be screwed into the screw to press into the joint. 2. To install the ventilation cap Before use, the blockage at the high position should be replaced with an exhaust screw plug to ensure that the gas in the body is discharged when the reducer is running. If it is not replaced in time, the reducer will run for a long time, and the gas in the reducer will swell the oil seal, resulting in oil leakage. 3. Replace lubricating oil in time Special attention should be paid to changing the oil. In addition, in the harsh working environment, high temperature, and heavy dust, the inspection should be carried out every half a month. If there is dirt, change the lubricating oil immediately to keep the lubricating oil clean and prolong the deceleration. The service life of the machine.