Precautions for lubricating oil replacement of the name reducer

Everyone knows the use of the reducer, but what should be paid attention to when replacing the lubricating oil in the reducer?       Under normal circumstances, the replacement of the lubricating oil of the reducer needs to be carried out at the operating temperature of the mechanical equipment, because the oil temperature is relatively high at this time, and the viscosity of the oil is relatively low, so the replacement is less difficult. When changing the lubricating oil of the reducer, one thing must be paid attention to: the power supply should be cut off to prevent electric shock, and the lubricating oil can only be replaced when the reducer is properly cooled to no danger of burning. First, we place an oil receiving pan under the oil drain bolt of the reducer, then open the oil level bolt, the oil drain bolt and the ventilator to start draining the oil, wait for all the oil to drain, then reinstall the oil drain bolt, and inject new lubricating oil , The brand and model of lubricating oil should be consistent with the original lubricating oil, and the oil volume should be consistent with the installation position. After observing the oil level through the oil level bolt and reaching the specified amount, tighten the oil level bolt and breather. In fact, it is relatively simple to replace the lubricating oil of the reducer, as long as you pay more attention to some details.       For more information, please consult Zhengming reducer, focus on reducer, helical gear reducer, hard tooth surface reducer, SEW reducer, geared motor, helical geared motor.