How to cool down the hardened gear reducer in a scientific way

With the development of the enterprise, the advantages of the hard tooth surface reducer are more and more recognized, so the scope of application is constantly expanding. We are very clear that the temperature of mechanical equipment may rise during use. In order to reduce the loss caused by high temperature, it is necessary to learn scientific cooling methods.

Scientific cooling method for hardened gear reducer:

1. When the heat is very large, some cooling equipment can be installed to ensure that the quenching gear reducer can be used normally. The cooling coil is installed inside, and the company can also connect some cooling water by itself. When the cooling water passes through the spiral tube, the heat will be transferred to the cooling water, and the heat will be transferred out of the spiral tube. Achieve heat dissipation effect.

2. When using this equipment, the flow of cooling water should not be too large and must flow freely through the gear reducer.

3. If ice will form if the production is not carried out for a long time, the cooling water must be drained.

In the daily production of the company and enterprises, if we take reasonable and effective cooling measures and regularly maintain the hardened gear reducer, we can also run the machine for a long time, thus reducing the company's expenditure and increasing profits.

For more information, please pay attention to Zhengming Transmission, hotline: 0512-57970560. Zhengming gear reducer focuses on gear reducer, helical gear reducer, hard tooth surface gear reducer, worm gear reducer.