How to cool down the planetary gear reducer?

How to cool down the planetary gear reducer?

1. Some cooling devices shall be installed to ensure the normal use of the gear reducer motor. The inside is equipped with a cooling spiral tube. Users can connect some cooling water by themselves. When the cooling water passes through the spiral tube, the heat will be transferred to the cooling water to transfer the heat, so as to achieve the cooling effect.

2. The flow of cooling water shall not be too large, and it must be able to pass through the gear reducer at will.

3. If you do not work for a long time, there will be a risk of icing, so you must drain the cooling water.

The reasonable cooling of the gear reducer motor can improve the efficiency and prolong the corresponding service life.

For more information, please pay attention to Zhengming Transmission, hotline: 0512-57970709. Zhengming gear reducer focuses on gear reducer, helical gear reducer, hard tooth surface gear reducer, worm gear reducer, planetary gear reducer